121 lines
5.3 KiB
C
Executable File
121 lines
5.3 KiB
C
Executable File
/* --COPYRIGHT--,BSD_EX
|
|
* Copyright (c) 2012, Texas Instruments Incorporated
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
*
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* * Neither the name of Texas Instruments Incorporated nor the names of
|
|
* its contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
|
|
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
|
|
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
|
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
|
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
|
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
|
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*******************************************************************************
|
|
*
|
|
* MSP430 CODE EXAMPLE DISCLAIMER
|
|
*
|
|
* MSP430 code examples are self-contained low-level programs that typically
|
|
* demonstrate a single peripheral function or device feature in a highly
|
|
* concise manner. For this the code may rely on the device's power-on default
|
|
* register values and settings such as the clock configuration and care must
|
|
* be taken when combining code from several examples to avoid potential side
|
|
* effects. Also see www.ti.com/grace for a GUI- and www.ti.com/msp430ware
|
|
* for an API functional library-approach to peripheral configuration.
|
|
*
|
|
* --/COPYRIGHT--*/
|
|
//******************************************************************************
|
|
// MSP430F20x2 Demo - ADC10, Sample A1, 1.5V, TA1 Trig, Set P1.0 if > 0.5V
|
|
//
|
|
// Description: A1 is sampled 16/second (ACLK/2048) with reference to 1.5V.
|
|
// Timer_A is run in upmode and TA1 is used to automatically trigger
|
|
// ADC10 conversion, TA0 defines the period. Internal oscillator times sample
|
|
// (16x) and conversion (13x). Inside ADC10_ISR if A1 > 0.5Vcc, P1.0 is set,
|
|
// else reset. Normal mode is LPM3.
|
|
// //* An external watch crystal on XIN XOUT is required for ACLK *//
|
|
//
|
|
// MSP430F20x2
|
|
// -----------------
|
|
// /|\| XIN|-
|
|
// | | | 32kHz
|
|
// --|RST XOUT|-
|
|
// | |
|
|
// >---|P1.1/A1 P1.0 |--> LED
|
|
//
|
|
// L. Westlund
|
|
// Texas Instruments Inc.
|
|
// May 2006
|
|
// Built with CCE Version: 3.2.0 and IAR Embedded Workbench Version: 3.41A
|
|
//******************************************************************************
|
|
#include <msp430.h>
|
|
|
|
int main(void)
|
|
{
|
|
WDTCTL = WDTPW + WDTHOLD; // Stop WDT
|
|
ADC10CTL1 = SHS_1 + CONSEQ_2 + INCH_1; // TA1 trigger sample start
|
|
ADC10CTL0 = SREF_1 + ADC10SHT_2 + REFON + ADC10ON + ADC10IE;
|
|
__enable_interrupt(); // Enable interrupts.
|
|
TACCR0 = 30; // Delay to allow Ref to settle
|
|
TACCTL0 |= CCIE; // Compare-mode interrupt.
|
|
TACTL = TASSEL_2 + MC_1; // TACLK = SMCLK, Up mode.
|
|
LPM0; // Wait for delay.
|
|
TACCTL0 &= ~CCIE; // Disable timer Interrupt
|
|
__disable_interrupt();
|
|
ADC10CTL0 |= ENC; // ADC10 Enable
|
|
ADC10AE0 |= 0x02; // P1.1 ADC10 option select
|
|
P1DIR |= 0x01; // Set P1.0 output
|
|
TACCR0 = 2048-1; // PWM Period
|
|
TACCTL1 = OUTMOD_3; // TACCR1 set/reset
|
|
TACCR1 = 2047; // TACCR1 PWM Duty Cycle
|
|
TACTL = TASSEL_1 + MC_1; // ACLK, up mode
|
|
|
|
__bis_SR_register(LPM3_bits + GIE); // Enter LPM3 w/ interrupts
|
|
}
|
|
|
|
// ADC10 interrupt service routine
|
|
#if defined(__TI_COMPILER_VERSION__) || defined(__IAR_SYSTEMS_ICC__)
|
|
#pragma vector=ADC10_VECTOR
|
|
__interrupt void ADC10_ISR(void)
|
|
#elif defined(__GNUC__)
|
|
void __attribute__ ((interrupt(ADC10_VECTOR))) ADC10_ISR (void)
|
|
#else
|
|
#error Compiler not supported!
|
|
#endif
|
|
{
|
|
if (ADC10MEM < 0x155) // ADC10MEM = A1 > 0.5V?
|
|
P1OUT &= ~0x01; // Clear P1.0 LED off
|
|
else
|
|
P1OUT |= 0x01; // Set P1.0 LED on
|
|
}
|
|
|
|
#if defined(__TI_COMPILER_VERSION__) || defined(__IAR_SYSTEMS_ICC__)
|
|
#pragma vector=TIMERA0_VECTOR
|
|
__interrupt void ta0_isr(void)
|
|
#elif defined(__GNUC__)
|
|
void __attribute__ ((interrupt(TIMERA0_VECTOR))) ta0_isr (void)
|
|
#else
|
|
#error Compiler not supported!
|
|
#endif
|
|
{
|
|
TACTL = 0;
|
|
LPM0_EXIT; // Exit LPM0 on return
|
|
}
|