120 lines
6.3 KiB
Plaintext
Executable File
120 lines
6.3 KiB
Plaintext
Executable File
; --COPYRIGHT--,BSD_EX
|
|
; Copyright (c) 2012, Texas Instruments Incorporated
|
|
; All rights reserved.
|
|
;
|
|
; Redistribution and use in source and binary forms, with or without
|
|
; modification, are permitted provided that the following conditions
|
|
; are met:
|
|
;
|
|
; * Redistributions of source code must retain the above copyright
|
|
; notice, this list of conditions and the following disclaimer.
|
|
;
|
|
; * Redistributions in binary form must reproduce the above copyright
|
|
; notice, this list of conditions and the following disclaimer in the
|
|
; documentation and/or other materials provided with the distribution.
|
|
;
|
|
; * Neither the name of Texas Instruments Incorporated nor the names of
|
|
; its contributors may be used to endorse or promote products derived
|
|
; from this software without specific prior written permission.
|
|
;
|
|
; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
|
|
; THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
; PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
|
|
; CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
; EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
|
; PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
|
; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
; WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
|
; OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
|
; EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
;
|
|
; ******************************************************************************
|
|
;
|
|
; MSP430 CODE EXAMPLE DISCLAIMER
|
|
;
|
|
; MSP430 code examples are self-contained low-level programs that typically
|
|
; demonstrate a single peripheral function or device feature in a highly
|
|
; concise manner. For this the code may rely on the device's power-on default
|
|
; register values and settings such as the clock configuration and care must
|
|
; be taken when combining code from several examples to avoid potential side
|
|
; effects. Also see www.ti.com/grace for a GUI- and www.ti.com/msp430ware
|
|
; for an API functional library-approach to peripheral configuration.
|
|
;
|
|
; --/COPYRIGHT--
|
|
;*******************************************************************************
|
|
; MSP430F20x2 Demo - ADC10, Sample A1, 1.5V, TA1 Trig, Set P1.0 if > 0.5V
|
|
;
|
|
; Description: A1 is sampled 16/second (ACLK/2048) with reference to 1.5V.
|
|
; Timer_A is run in upmode and TA1 is used to automatically trigger
|
|
; ADC10 conversion, TA0 defines the period. Internal oscillator times sample
|
|
; (16x) and conversion (13x). Inside ADC10_ISR if A1 > 0.5Vcc, P1.0 is set,
|
|
; else reset. Normal mode is LPM3.
|
|
; //* An external watch crystal on XIN XOUT is required for ACLK *//
|
|
;
|
|
; MSP430F20x2
|
|
; -----------------
|
|
; /|\| XIN|-
|
|
; | | | 32kHz
|
|
; --|RST XOUT|-
|
|
; | |
|
|
; >---|P1.1/A1 P1.0|--> LED
|
|
;
|
|
; L. Westlund
|
|
; Texas Instruments Inc.
|
|
; May 2006
|
|
; Built with IAR Embedded Workbench Version: 3.41A
|
|
;*******************************************************************************
|
|
#include <msp430.h>
|
|
;-------------------------------------------------------------------------------
|
|
RSEG CSTACK ; Define stack segment
|
|
;-------------------------------------------------------------------------------
|
|
RSEG CODE ; Assemble to Flash memory
|
|
;-------------------------------------------------------------------------------
|
|
RESET mov.w #SFE(CSTACK),SP ; Initialize stackpointer
|
|
StopWDT mov.w #WDTPW+WDTHOLD,&WDTCTL ; Stop WDT
|
|
SetupADC10 mov.w #SHS_1+CONSEQ_2+INCH_1,&ADC10CTL1 ; TA1 trigger sample start
|
|
mov.w #SREF_1+ADC10SHT_2+REFON+ADC10ON+ADC10IE,&ADC10CTL0;
|
|
mov.w #30,&TACCR0 ; Delay to allow Ref to settle
|
|
bis.w #CCIE,&TACCTL0 ; Compare-mode interrupt.
|
|
mov.w #TACLR+MC_1+TASSEL_2,&TACTL; up mode, SMCLK
|
|
bis.w #LPM0+GIE,SR ; Enter LPM0,enable interrupts
|
|
bic.w #CCIE,&TACCTL0 ; Disable timer interrupt
|
|
dint ; Disable Interrupts
|
|
bis.w #ENC,&ADC10CTL0 ; ADC10 enable set
|
|
bis.b #002h,&ADC10AE0 ; P1.1 ADC10 option select
|
|
SetupP1 bis.b #001h,&P1DIR ; P1.0 output
|
|
SetupC0 mov.w #2048-1,&TACCR0 ; PWM Period
|
|
SetupC1 mov.w #OUTMOD_3,&TACCTL1 ; TACCR1 set/reset
|
|
mov.w #2047,&TACCR1 ; TACCR1 PWM Duty Cycle
|
|
SetupTA mov.w #TASSEL_1+MC_1,&TACTL ; ACLK, up mode
|
|
;
|
|
Mainloop bis.w #LPM3+GIE,SR ; Enter LPM3
|
|
nop ; Required only for debugger
|
|
;
|
|
;-------------------------------------------------------------------------------
|
|
TA0_ISR; ISR for TACCR0
|
|
;-------------------------------------------------------------------------------
|
|
clr.w &TACTL ; Clear Timer_A control registers
|
|
bic.w #LPM0,0(SP) ; Exit LPM0 on reti
|
|
reti ;
|
|
;-------------------------------------------------------------------------------
|
|
ADC10_ISR;
|
|
;-------------------------------------------------------------------------------
|
|
bic.b #01h,&P1OUT ; P1.0 = 0
|
|
cmp.w #0155h,&ADC10MEM ; ADC10MEM = A1 > 0.5V?
|
|
jlo ADC10_Exit ; Again
|
|
bis.b #01h,&P1OUT ; P1.0 = 1
|
|
ADC10_Exit reti ;
|
|
;
|
|
;-------------------------------------------------------------------------------
|
|
COMMON INTVEC ; Interrupt Vectors
|
|
;-------------------------------------------------------------------------------
|
|
ORG ADC10_VECTOR ; ADC10 Vector
|
|
DW ADC10_ISR
|
|
ORG TIMERA0_VECTOR ; Timer_A0 Vector
|
|
DW TA0_ISR
|
|
ORG RESET_VECTOR ; POR, ext. Reset
|
|
DW RESET
|
|
END
|