Files
2019-11-12 23:43:53 +02:00

87 lines
4.3 KiB
Plaintext
Executable File

; --COPYRIGHT--,BSD_EX
; Copyright (c) 2012, Texas Instruments Incorporated
; All rights reserved.
;
; Redistribution and use in source and binary forms, with or without
; modification, are permitted provided that the following conditions
; are met:
;
; * Redistributions of source code must retain the above copyright
; notice, this list of conditions and the following disclaimer.
;
; * Redistributions in binary form must reproduce the above copyright
; notice, this list of conditions and the following disclaimer in the
; documentation and/or other materials provided with the distribution.
;
; * Neither the name of Texas Instruments Incorporated nor the names of
; its contributors may be used to endorse or promote products derived
; from this software without specific prior written permission.
;
; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
; THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
; PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
; CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
; EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
; PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
; WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
; OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
; EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
; ******************************************************************************
;
; MSP430 CODE EXAMPLE DISCLAIMER
;
; MSP430 code examples are self-contained low-level programs that typically
; demonstrate a single peripheral function or device feature in a highly
; concise manner. For this the code may rely on the device's power-on default
; register values and settings such as the clock configuration and care must
; be taken when combining code from several examples to avoid potential side
; effects. Also see www.ti.com/grace for a GUI- and www.ti.com/msp430ware
; for an API functional library-approach to peripheral configuration.
;
; --/COPYRIGHT--
;*******************************************************************************
; MSP430F20xx Demo - WDT+ Failsafe Clock, DCO SMCLK
;
; Description; Allow WDT+ in watchdog to timeout. Toggle P1.0 in main
; funnction. LPM4 is entered, this example will demonstrate WDT+ feature
; of preventing WDT+ clock to be disabled.
; The WD+ will not allow active WDT+ to be disabled by software, the
; The WDT+ will not allow active WDT+ to be disabled by software even though
; the LED continues to Flash because the WDT times out normally even though
; software has attempted to disable WDT+ clock source.
; The MSP430F1xx will stop code execution when software disables WDT+ clock
; source.
; ACLK = n/a, MCLK = SMCLK = default DCO
;
; MSP430F20xx
; -----------------
; /|\| XIN|-
; | | |
; --|RST XOUT|-
; | |
; | P1.0|-->LED
;
; M.Buccini/ L. Westlund
; Texas Instruments, Inc
; October 2005
; Built with IAR Embedded Workbench Version: 3.40A
;*******************************************************************************
#include <msp430.h>
;-------------------------------------------------------------------------------
ORG 0F800h ; Program Reset
;-------------------------------------------------------------------------------
RESET mov.w #0280h,SP ; Initialize stackpointer
bis.b #001h,&P1DIR ; P1.0 output
xor.b #001h,&P1OUT ; Toggle P1.0
bis.w #LPM4,SR ; Disable all clocks
Mainloop jmp $
;-------------------------------------------------------------------------------
; Interrupt Vectors
;-------------------------------------------------------------------------------
ORG 0FFFEh ; MSP430 RESET Vector
DW RESET ;
END