initial commit

2019-11-12 23:43:53 +02:00
parent e1e104b1f7
commit 2b8c639fa2
211 changed files with 24264 additions and 0 deletions
@@ -0,0 +1,96 @@
+/* --COPYRIGHT--,BSD_EX
+ * Copyright (c) 2012, Texas Instruments Incorporated
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * *  Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *
+ * *  Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * *  Neither the name of Texas Instruments Incorporated nor the names of
+ *    its contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *******************************************************************************
+ * 
+ *                       MSP430 CODE EXAMPLE DISCLAIMER
+ *
+ * MSP430 code examples are self-contained low-level programs that typically
+ * demonstrate a single peripheral function or device feature in a highly
+ * concise manner. For this the code may rely on the device's power-on default
+ * register values and settings such as the clock configuration and care must
+ * be taken when combining code from several examples to avoid potential side
+ * effects. Also see www.ti.com/grace for a GUI- and www.ti.com/msp430ware
+ * for an API functional library-approach to peripheral configuration.
+ *
+ * --/COPYRIGHT--*/
+//******************************************************************************
+//  MSP430F20xx Demo - USICNT Used as a One-Shot Timer Function, DCO SMCLK
+//
+//  Description: USI conunter is used as a one-shot timer. The USI
+//  conunter ISR toggles P1.0 using software. As coded ACLK is pre-divided by
+//  128 and the USICNT loaded with 32, for a total divided of 4096 or
+//  12-bits. USICNT must be reloaded after each interrupt which also clears
+//  interrupt flag.
+//  ACLK = VLO, MCLK = SMCLK = default DCO
+//
+//		  MSP430F20xx
+//             -----------------
+//         /|\|              XIN|-
+//          | |                 |
+//          --|RST          XOUT|-
+//            |                 |
+//            |             P1.0|-->LED
+//
+//  M. Buccini / L. Westlund
+//  Texas Instruments Inc.
+//  September 2005
+//  Built with CCE Version: 3.2.0 and IAR Embedded Workbench Version: 3.40A
+//******************************************************************************
+
+#include <msp430.h>
+
+int main(void)
+{
+  WDTCTL = WDTPW + WDTHOLD;                 // Stop watchdog timer
+  BCSCTL3 |= LFXT1S_2;                      // ACLK = VLO
+  P1DIR |= 0x01;                            // Set P1.0 to output direction
+  USICTL0 |= USIMST;                        // Master mode
+  USICTL1 |= USIIE;                         // Counter interrupt, flag remains set
+  USICKCTL = USIDIV_7 + USISSEL_1;          // /128 ACLK
+  USICTL0 &= ~USISWRST;                     // USI released for operation
+  __bis_SR_register(LPM3_bits + GIE);       // Enter LPM3 w/ interrupt
+}
+
+// USI interrupt service routine
+#if defined(__TI_COMPILER_VERSION__) || defined(__IAR_SYSTEMS_ICC__)
+#pragma vector=USI_VECTOR
+__interrupt void universal_serial_interface(void)
+#elif defined(__GNUC__)
+void __attribute__ ((interrupt(USI_VECTOR))) universal_serial_interface (void)
+#else
+#error Compiler not supported!
+#endif
+{
+  P1OUT ^= 0x01;                            // Toggle P1.0 using exclusive-OR
+  USICNT = 0x1F;                            // re-load counter
+}
+