initial commit
This commit is contained in:
Imants Pulkstenis
@@ -0,0 +1,118 @@
|
||||
; --COPYRIGHT--,BSD_EX
|
||||
; Copyright (c) 2012, Texas Instruments Incorporated
|
||||
; All rights reserved.
|
||||
;
|
||||
; Redistribution and use in source and binary forms, with or without
|
||||
; modification, are permitted provided that the following conditions
|
||||
; are met:
|
||||
;
|
||||
; * Redistributions of source code must retain the above copyright
|
||||
; notice, this list of conditions and the following disclaimer.
|
||||
;
|
||||
; * Redistributions in binary form must reproduce the above copyright
|
||||
; notice, this list of conditions and the following disclaimer in the
|
||||
; documentation and/or other materials provided with the distribution.
|
||||
;
|
||||
; * Neither the name of Texas Instruments Incorporated nor the names of
|
||||
; its contributors may be used to endorse or promote products derived
|
||||
; from this software without specific prior written permission.
|
||||
;
|
||||
; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
|
||||
; THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
||||
; PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
|
||||
; CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
||||
; EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
||||
; PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
||||
; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
; WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
||||
; OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
; EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
;
|
||||
; ******************************************************************************
|
||||
;
|
||||
; MSP430 CODE EXAMPLE DISCLAIMER
|
||||
;
|
||||
; MSP430 code examples are self-contained low-level programs that typically
|
||||
; demonstrate a single peripheral function or device feature in a highly
|
||||
; concise manner. For this the code may rely on the device's power-on default
|
||||
; register values and settings such as the clock configuration and care must
|
||||
; be taken when combining code from several examples to avoid potential side
|
||||
; effects. Also see www.ti.com/grace for a GUI- and www.ti.com/msp430ware
|
||||
; for an API functional library-approach to peripheral configuration.
|
||||
;
|
||||
; --/COPYRIGHT--
|
||||
;*******************************************************************************
|
||||
; MSP430F20x2 Demo - ADC10, Sample A1, 1.5V Ref, Set P1.0 if A1 > 0.2V
|
||||
;
|
||||
; Description: A single sample is made on A1 with reference to internal
|
||||
; 1.5V Vref. Software sets ADC10SC to start sample and conversion - ADC10SC
|
||||
; automatically cleared at EOC. ADC10 internal oscillator times sample (16x)
|
||||
; and conversion. In Mainloop MSP430 waits in LPM0 to save power until ADC10
|
||||
; conversion complete, ADC10_ISR will force exit from any LPMx in Mainloop on
|
||||
; reti. If A1 > 0.2V, P1.0 set, else reset.
|
||||
;
|
||||
; MSP430F20x2
|
||||
; -----------------
|
||||
; /|\| XIN|-
|
||||
; | | |
|
||||
; --|RST XOUT|-
|
||||
; | |
|
||||
; >---|P1.1/A1 P1.0|--> LED
|
||||
;
|
||||
; P.Thanigai
|
||||
; Texas Instruments Inc.
|
||||
; May 2007
|
||||
; Built with Code Composer Essentials Version: 2.0
|
||||
;*******************************************************************************
|
||||
.cdecls C,LIST, "msp430.h"
|
||||
;-------------------------------------------------------------------------------
|
||||
.def RESET ; Export program entry-point to
|
||||
; make it known to linker.
|
||||
|
||||
;------------------------------------------------------------------------------
|
||||
.text ; Progam Start
|
||||
;------------------------------------------------------------------------------
|
||||
RESET mov.w #0280h,SP ; Initialize stackpointer
|
||||
StopWDT mov.w #WDTPW+WDTHOLD,&WDTCTL ; Stop WDT
|
||||
SetupADC10 mov.w #SREF_1+ADC10SHT_2+REFON+ADC10ON+ADC10IE,&ADC10CTL0;
|
||||
mov.w #30,&TACCR0 ; Delay to allow Ref to settle
|
||||
bis.w #CCIE,&TACCTL0 ; Compare-mode interrupt.
|
||||
mov.w #TACLR+MC_1+TASSEL_2,&TACTL; up mode, SMCLK
|
||||
bis.w #LPM0+GIE,SR ; Enter LPM0, enable interrupts
|
||||
bic.w #CCIE,&TACCTL0 ; Disable timer interrupt
|
||||
dint
|
||||
bis.b #02h,&ADC10AE0 ; P1.1 ADC10 option select
|
||||
mov.w #INCH_1, &ADC10CTL1 ; A1 input
|
||||
SetupP1 bis.b #001h,&P1DIR ; P1.0 output
|
||||
|
||||
Mainloop bis.w #ENC+ADC10SC,&ADC10CTL0 ; Start sampling/conversion
|
||||
bis.w #CPUOFF+GIE,SR ; LPM0, ADC12 ISR will force exit
|
||||
bic.b #01h,&P1OUT ; P1.0 = 0
|
||||
cmp.w #088h,&ADC10MEM ; ADC10MEM = A1 > 0.2V?
|
||||
jlo Mainloop ; Again
|
||||
bis.b #01h,&P1OUT ; P1.0 = 1
|
||||
jmp Mainloop ; Again
|
||||
|
||||
;-------------------------------------------------------------------------------
|
||||
TA0_ISR; ISR for TACCR0
|
||||
;-------------------------------------------------------------------------------
|
||||
clr.w &TACTL ; Clear Timer_A control registers
|
||||
bic.w #LPM0,0(SP) ; Exit LPM0, interrupts enabled
|
||||
reti ;
|
||||
;-------------------------------------------------------------------------------
|
||||
ADC10_ISR; Exit LPM0 on reti
|
||||
;-------------------------------------------------------------------------------
|
||||
bic.w #LPM0,0(SP) ; Exit LPM0, interrupts enabled
|
||||
reti ;
|
||||
;------------------------------------------------------------------------------
|
||||
; Interrupt Vectors
|
||||
;------------------------------------------------------------------------------
|
||||
.sect ".reset" ; MSP430 RESET Vector
|
||||
.short RESET ;
|
||||
.sect ".int05" ; ADC10 Vector
|
||||
.short ADC10_ISR ;
|
||||
.sect ".int09" ; Timer_A0 Vector
|
||||
.short TA0_ISR ;
|
||||
.end
|
||||
|
||||
Reference in New Issue
Block a user