/* --COPYRIGHT--,BSD_EX
 * Copyright (c) 2012, Texas Instruments Incorporated
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * *  Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *
 * *  Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * *  Neither the name of Texas Instruments Incorporated nor the names of
 *    its contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *******************************************************************************
 * 
 *                       MSP430 CODE EXAMPLE DISCLAIMER
 *
 * MSP430 code examples are self-contained low-level programs that typically
 * demonstrate a single peripheral function or device feature in a highly
 * concise manner. For this the code may rely on the device's power-on default
 * register values and settings such as the clock configuration and care must
 * be taken when combining code from several examples to avoid potential side
 * effects. Also see www.ti.com/grace for a GUI- and www.ti.com/msp430ware
 * for an API functional library-approach to peripheral configuration.
 *
 * --/COPYRIGHT--*/
//******************************************************************************
//   MSP430F20x1 Demo - Comp_A, Detect Threshold, Set P1.0 if P1.1 > 0.25*Vcc
//
//   Description: Use Comparator_A to detect a voltage threshold.
//   Using an external potentiometer, an unknown voltage is applied to P1.1.
//   Comparator_A compares the unknown voltage to an internal reference
//   voltage, in this example 0.25*VCC. If the unknown voltage is higher
//   than 0.25*VCC, P1.0 is set, if not, P1.0 is reset.
//   ACLK = n/a, MCLK = SMCLK = default DCO
//
//          MSP430F20x1
//       -----------------
//   /|\ |            XIN|-
//    |  |               |
//    ---|RST        XOUT|-
//    |  |               |
//    R<-|P1.1/CA1   P1.0|-->LED
//    |  |               |
//    ---|VSS
//
//  M. Buccini / L. Westlund
//  Texas Instruments Inc.
//  December 2005
//  Built with CCE Version: 3.2.0 and IAR Embedded Workbench Version: 3.40A
//******************************************************************************

#include <msp430.h>

int main (void)
{
  WDTCTL = WDTPW + WDTHOLD;                 // Stop WDT
  P1DIR |= 0x01;                            // P1.0 output
  CACTL1 = CARSEL + CAREF0 + CAON;          // 0.25 Vcc = -comp, on
  CACTL2 = P2CA4;                           // P1.1/CA1 = +comp

  while (1)                                 // Test comparator_A output
  {
    if ((CAOUT & CACTL2))
      P1OUT |= 0x01;                        // if CAOUT set, set P1.0
    else P1OUT &= ~0x01;                    // else reset
  }
}