/* --COPYRIGHT--,BSD_EX * Copyright (c) 2012, Texas Instruments Incorporated * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * * Neither the name of Texas Instruments Incorporated nor the names of * its contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ******************************************************************************* * * MSP430 CODE EXAMPLE DISCLAIMER * * MSP430 code examples are self-contained low-level programs that typically * demonstrate a single peripheral function or device feature in a highly * concise manner. For this the code may rely on the device's power-on default * register values and settings such as the clock configuration and care must * be taken when combining code from several examples to avoid potential side * effects. Also see www.ti.com/grace for a GUI- and www.ti.com/msp430ware * for an API functional library-approach to peripheral configuration. * * --/COPYRIGHT--*/ //****************************************************************************** // MSP430F20xx Demo - I2C Slave Transmitter, single byte // // Description: I2C Slave communicates with I2C Master using // the USI. Slave data is sent and increments from 0x00 with each transmitted // byte which is verified by the Master. // LED off for address or data Ack; LED on for address or data NAck. // ACLK = n/a, MCLK = SMCLK = Calibrated 1MHz // // ***THIS IS THE SLAVE CODE*** // // Slave Master // (msp430x20x3_usi_06.c) // MSP430F20x2/3 MSP430F20x2/3 // ----------------- ----------------- // /|\| XIN|- /|\| XIN|- // | | | | | | // --|RST XOUT|- --|RST XOUT|- // | | | | // LED <-|P1.0 | | | // | | | P1.0|-> LED // | SDA/P1.7|------->|P1.7/SDA | // | SCL/P1.6|<-------|P1.6/SCL | // // Note: internal pull-ups are used in this example for SDA & SCL // // Z. Albus // Texas Instruments Inc. // May 2006 // Built with CCE Version: 3.2.0 and IAR Embedded Workbench Version: 3.41A //****************************************************************************** #include char SLV_Data = 0; // Variable for transmitted data char SLV_Addr = 0x90; // Address is 0x48<<1 for R/W int I2C_State = 0; // State variable int main(void) { WDTCTL = WDTPW + WDTHOLD; // Stop watchdog if (CALBC1_1MHZ==0xFF) // If calibration constants erased { while(1); // do not load, trap CPU!! } DCOCTL = 0; // Select lowest DCOx and MODx settings BCSCTL1 = CALBC1_1MHZ; // Set DCO DCOCTL = CALDCO_1MHZ; P1OUT = 0xC0; // P1.6 & P1.7 Pullups P1REN |= 0xC0; // P1.6 & P1.7 Pullups P1DIR = 0xFF; // Unused pins as outputs P2OUT = 0; P2DIR = 0xFF; USICTL0 = USIPE6+USIPE7+USISWRST; // Port & USI mode setup USICTL1 = USII2C+USIIE+USISTTIE; // Enable I2C mode & USI interrupts USICKCTL = USICKPL; // Setup clock polarity USICNT |= USIIFGCC; // Disable automatic clear control USICTL0 &= ~USISWRST; // Enable USI USICTL1 &= ~USIIFG; // Clear pending flag __enable_interrupt(); while(1) { LPM0; // CPU off, await USI interrupt __no_operation(); // Used for IAR } } //****************************************************** // USI interrupt service routine //****************************************************** #if defined(__TI_COMPILER_VERSION__) || defined(__IAR_SYSTEMS_ICC__) #pragma vector = USI_VECTOR __interrupt void USI_TXRX (void) #elif defined(__GNUC__) void __attribute__ ((interrupt(USI_VECTOR))) USI_TXRX (void) #else #error Compiler not supported! #endif { if (USICTL1 & USISTTIFG) // Start entry? { P1OUT |= 0x01; // LED on: Sequence start I2C_State = 2; // Enter 1st state on start } switch(I2C_State) { case 0: //Idle, should not get here break; case 2: //RX Address USICNT = (USICNT & 0xE0) + 0x08; // Bit counter = 8, RX Address USICTL1 &= ~USISTTIFG; // Clear start flag I2C_State = 4; // Go to next state: check address break; case 4: // Process Address and send (N)Ack if (USISRL & 0x01) // If read... SLV_Addr++; // Save R/W bit USICTL0 |= USIOE; // SDA = output if (USISRL == SLV_Addr) // Address match? { USISRL = 0x00; // Send Ack P1OUT &= ~0x01; // LED off I2C_State = 8; // Go to next state: TX data } else { USISRL = 0xFF; // Send NAck P1OUT |= 0x01; // LED on: error I2C_State = 6; // Go to next state: prep for next Start } USICNT |= 0x01; // Bit counter = 1, send (N)Ack bit break; case 6: // Prep for Start condition USICTL0 &= ~USIOE; // SDA = input SLV_Addr = 0x90; // Reset slave address I2C_State = 0; // Reset state machine break; case 8: // Send Data byte USICTL0 |= USIOE; // SDA = output USISRL = SLV_Data; // Send data byte USICNT |= 0x08; // Bit counter = 8, TX data I2C_State = 10; // Go to next state: receive (N)Ack break; case 10:// Receive Data (N)Ack USICTL0 &= ~USIOE; // SDA = input USICNT |= 0x01; // Bit counter = 1, receive (N)Ack I2C_State = 12; // Go to next state: check (N)Ack break; case 12:// Process Data Ack/NAck if (USISRL & 0x01) // If Nack received... { P1OUT |= 0x01; // LED on: error } else // Ack received { P1OUT &= ~0x01; // LED off SLV_Data++; // Increment Slave data } // Prep for Start condition USICTL0 &= ~USIOE; // SDA = input SLV_Addr = 0x90; // Reset slave address I2C_State = 0; // Reset state machine break; } USICTL1 &= ~USIIFG; // Clear pending flags }