; --COPYRIGHT--,BSD_EX
;  Copyright (c) 2012, Texas Instruments Incorporated
;  All rights reserved.
; 
;  Redistribution and use in source and binary forms, with or without
;  modification, are permitted provided that the following conditions
;  are met:
; 
;  *  Redistributions of source code must retain the above copyright
;     notice, this list of conditions and the following disclaimer.
; 
;  *  Redistributions in binary form must reproduce the above copyright
;     notice, this list of conditions and the following disclaimer in the
;     documentation and/or other materials provided with the distribution.
; 
;  *  Neither the name of Texas Instruments Incorporated nor the names of
;     its contributors may be used to endorse or promote products derived
;     from this software without specific prior written permission.
; 
;  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
;  THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
;  PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
;  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
;  EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
;  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
;  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
;  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
;  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
;  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
; 
; ******************************************************************************
;  
;                        MSP430 CODE EXAMPLE DISCLAIMER
; 
;  MSP430 code examples are self-contained low-level programs that typically
;  demonstrate a single peripheral function or device feature in a highly
;  concise manner. For this the code may rely on the device's power-on default
;  register values and settings such as the clock configuration and care must
;  be taken when combining code from several examples to avoid potential side
;  effects. Also see www.ti.com/grace for a GUI- and www.ti.com/msp430ware
;  for an API functional library-approach to peripheral configuration.
; 
; --/COPYRIGHT--
;*******************************************************************************
;   MSP430F20xx Demo - Timer_A, Toggle P1.1/TA0, Up Mode, DCO SMCLK
;
;   Description: Toggle P1.1 using hardware TA0 output. Timer_A is configured
;   for up mode with CCR0 defining period, TA0 also output on P1.1. In this
;   example, CCR0 is loaded with 500 and TA0 will toggle P1.1 at TACLK/500.
;   Thus the output frequency on P1.1 will be the TACLK/1000. No CPU or
;   software resources required.
;   As coded with TACLK = SMCLK, P1.1 output frequency is ~1000000/1000.
;   SMCLK = MCLK = TACLK = default DCO
;
;                MSP430F20xx
;             -----------------
;         /|\|              XIN|-
;          | |                 |
;          --|RST          XOUT|-
;            |                 |
;            |         P1.1/TA0|--> SMCLK/1000
;
;   M. Buccini / L. Westlund
;   Texas Instruments Inc.
;   October 2005
;   Built with IAR Embedded Workbench Version: 3.40A
;*******************************************************************************
#include <msp430.h>
;-------------------------------------------------------------------------------
            ORG     0F800h                  ; Program Reset
;-------------------------------------------------------------------------------
RESET       mov.w   #0280h,SP               ; Initialize stackpointer
StopWDT     mov.w   #WDTPW+WDTHOLD,&WDTCTL  ; Stop WDT
SetupP1     bis.b   #002h,&P1DIR            ; P1.1 output
            bis.b   #002h,&P1SEL            ; P1.1 option slect
SetupC0     mov.w   #OUTMOD_4,&CCTL0        ; CCR0 toggle, upmode
            mov.w   #500-1,&CCR0            ;
SetupTA     mov.w   #TASSEL_2+MC_1,&TACTL   ; SMCLK, clear TAR
                                            ;						
Mainloop    bis.w   #CPUOFF,SR              ; CPU off
            nop                             ; Required only for debugger
                                            ;
;-------------------------------------------------------------------------------
;           Interrupt Vectors
;-------------------------------------------------------------------------------
            ORG     0FFFEh                  ; MSP430 RESET Vector
            DW      RESET                   ;
            END