; --COPYRIGHT--,BSD_EX
;  Copyright (c) 2012, Texas Instruments Incorporated
;  All rights reserved.
; 
;  Redistribution and use in source and binary forms, with or without
;  modification, are permitted provided that the following conditions
;  are met:
; 
;  *  Redistributions of source code must retain the above copyright
;     notice, this list of conditions and the following disclaimer.
; 
;  *  Redistributions in binary form must reproduce the above copyright
;     notice, this list of conditions and the following disclaimer in the
;     documentation and/or other materials provided with the distribution.
; 
;  *  Neither the name of Texas Instruments Incorporated nor the names of
;     its contributors may be used to endorse or promote products derived
;     from this software without specific prior written permission.
; 
;  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
;  THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
;  PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
;  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
;  EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
;  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
;  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
;  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
;  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
;  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
; 
; ******************************************************************************
;  
;                        MSP430 CODE EXAMPLE DISCLAIMER
; 
;  MSP430 code examples are self-contained low-level programs that typically
;  demonstrate a single peripheral function or device feature in a highly
;  concise manner. For this the code may rely on the device's power-on default
;  register values and settings such as the clock configuration and care must
;  be taken when combining code from several examples to avoid potential side
;  effects. Also see www.ti.com/grace for a GUI- and www.ti.com/msp430ware
;  for an API functional library-approach to peripheral configuration.
; 
; --/COPYRIGHT--
;*******************************************************************************
;   MSP430F20x3 Demo - SD16A, Sample A1+ Continuously, Set P1.0 if > 0.3V
;
;   Description: A continuous single-ended sample is made on A1+ using internal
;   VREf. Unipolar output format used.
;   Inside of SD16 ISR, if A1 > 1/2VRef (0.3V), P1.0 set, else reset.
;   ACLK = n/a, MCLK = SMCLK = SD16CLK = default DCO
;
;                 MSP430F20x3
;              ------------------
;          /|\|              XIN|-
;           | |                 |
;           --|RST          XOUT|-
;             |                 |
;     Vin+ -->|A1+ P1.2         |
;             |A1- = VSS    P1.0|-->LED
;             |                 |
;
;   M. Buccini / L. Westlund
;   Texas Instruments Inc.
;   October 2005
;   Built with IAR Embedded Workbench Version: 3.40A
;*******************************************************************************
#include <msp430.h>
;-------------------------------------------------------------------------------
            ORG     0F800h                  ; Program Reset
;-------------------------------------------------------------------------------
RESET       mov.w   #0280h,SP               ; Initialize stackpointer
StopWDT     mov.w   #WDTPW+WDTHOLD,&WDTCTL  ; Stop WDT
SetupP1     bis.b   #001h,&P1DIR            ; P1.0 output
SetupSD16   mov.w   #SD16REFON+SD16SSEL_1,&SD16CTL  ; 1.2V ref, SMCLK
            mov.b   #SD16INCH_1,&SD16INCTL0       ; A1+/-
            mov.w   #SD16UNI+SD16IE,&SD16CCTL0    ; 256OSR, unipolar, inter
            mov.b   #SD16AE2,&SD16AE        ; P1.1 A1+, A1- = VSS
            bis.w   #SD16SC,&SD16CCTL0      ; Start conversion
                                            ;				
Mainloop    bis.w   #CPUOFF+GIE,SR          ; CPU off, enable interrupts
            nop                             ; Required only for debugger
                                            ;
;-------------------------------------------------------------------------------
SD16_ISR;
;-------------------------------------------------------------------------------
            bic.b   #01h,&P1OUT             ;
            cmp.w   #07FFFh,&SD16MEM0       ; SD16MEM0 > 0.3V?, clears IFG
            jlo     Done                    ;
            bis.b   #01h,&P1OUT             ;
Done        reti                            ;		
                                            ;
;-------------------------------------------------------------------------------
;           Interrupt Vectors
;-------------------------------------------------------------------------------
            ORG     0FFFEh                  ; MSP430 RESET Vector
            DW      RESET                   ;
            ORG     0FFEAh                  ; SD16 Vector
            DW      SD16_ISR                ;
            END